Hardware |
- 64-bit RISC CPU, 300 MHz, 420 MIPS
- 10 x DSP, 33 MHz, 60 MIPS each
- 32 MB onboard SDRAM Memory
- Telephony Interface:
- RJ-45 connector, software-selectable E1/T1 interface
- ISDN Primary Rate Interface (PRI) configuration
- High-Impedance Mode for passive monitoring
|
- Host Interface
- Half-size PCI form factor
- PCI 2.2 up to 66 MHz
- 3.3/5 V universal signaling
- PCI-X compatible
- PCI Plug and Play
- Scaleable to 8 adapters per system
- Physical dimensions
- 176,41 mm x 106,68 mm
- 189,72 mm x 126,37 mm (incl. bracket and retainer)
|
| |
Environmental |
- Operating temperature: 10°C to 50°C
- Storage temperature: 0°C to 70°C
|
- Operating humidity: 10% to 90% (non-condensing)
|
| |
Power |
- Power consumption: 650 mA @+5 V typical
|
- Maximum tolerance in power supply variation: -5% to +5%
|
| |
Warranty |
|
|
| |
Certifications and Approvals |
- EMC: FCC part 15, ICES-003, EN55022, EN55024
- Safety: UL 60950, CSA 60950, EN 60950
|
- Telecom: TIA 968-A (FCC part 68), IC CS03, TBR4
- CE Mark
|
| |
Driver Software |
- Supported Operating Systems
- Microsoft: Windows 2000, Windows 2003 Server, and Windows XP, including 64-Bit Editions
- Linux: Red Hat, SuSE and Debian distributions
- Application Interfaces
- Microsoft: WAN Miniport, COM Port, CAPI 2.0, TAPI, Diva Server API (SDK)
- Linux: TTY, CAPI 2.0, Diva Server API (SDK)
|
- M-Adapter Feature (patent pending)
- Combined Virtual Adapter
- Internal Call Transfer
- Explicit Call Transfer Emulation
|
| |
D-Channel and Signaling Protocols |
- ETSI-DSS1 (Euro-ISDN)
- NI-1 (North America National ISDN 1)
- 1TR6 (Germany)
- NET3 (Belgium)
- VN3/4/6 (France)
- 4ESS (AT&T)
- 5ESS (AT&T)
- 5ESS (Lucent)
- DMS100 (Nortel)
- T1/RBS (Robbed Bit Signaling)
|
- INS-64 (Japan)
- INS-1500 (Japan)
- Australia on-ramp
- Q-SIG
- E1/R2 (China)
- E1/R2 (India)
- Channelized E1
- External Signaling (transparent D-channel)
- Direct Access Mode (no signaling)
- Network Termination (NT Mode)
|
| |
ISDN Supplementary Services |
- Number identification services (CLIP, CLIR, COLP, COLR, KEY, MSN, DDI, SUB)
- Call offering services (TP, CFU, CFB, CFNR)
|
- Call completion services (CW, HOLD, ECT)
- Charging Services (AoC)
- Conference (Three-party, Large)
|
| |
Basic Media Processing Features - available for up 24 (T1) and up to 30 (E1) concurrent connections |
- B-Channel Protocols
- Transparent HDLC
- Transparent (Voice)
- Synchronous PPP and MLPPP
- X.75 (LAPB)
- X.25
- T.90NL
- T.70NL
- Rate adaptation (56 kbps)
- V.42bis
- V.120
- PIAFS
- Switching and Conferencing
- On-board switching
- Cross-board switching
|
- Voice and speech
- G.711
- Full-duplex voice
- DTMF Detection and Generation
- Recording and Playback
- OKI ADPCM, 8 KHz sampling
- Audio Tapping
- Fax Support
- Remote Access (RAS)
- via HDLC, V.90, GSM, V.120, X.75
|
| |
Enhanced Media Processing Features - additionally available for up to 8 concurrent connections |
- B-Channel Protocols
- T.30, Modem up to V.90, V.42, V.110
- Voice and speech
- DTMF Clamping and Filtering
- Generic Tone detection and generation
- Voice Activity Detection
- Silence Detection
- Human talker detection
- G.168 echo cancellation
- OKI ADPCM, 6 KHz sampling
- Switching and Conferencing
- Automatic Gain control (AGC)
|
- Voice over IP (VoIP)
- Voice codecs: G.711, G.726, GSM
- G.168 echo cancellation
- Adaptive jitter buffer
- Voice activity detection (VAD)
- Comfort noise generation (CNG)
- RTP framing
- Fax Support
- Fax class 1 and 2
- Fax Group 3, (V.17, V.29, V.27ter, V.21, V.34 Modulation), up to 33.6 kbps
- Remote Access (RAS)
- via GSM (V.110)
- via analog modem (up to V.90)
|